Easy Travel Elite Owner's Manual download pdf (Page 32)

www.pridemobility.com Elite Traveller

POSITIONING BELT (OPTIONAL)

Your scooter seat may be equipped with an auto-type positioning belt that can be adjusted for operator

comfort. See figure 23A. The positioning belt is designed to help support the operator so that he or she

does not slide down or forward in the seat. The positioning belt is not designed for use as a restraining

device.

To install the positioning belt (if required):

1. Remove the seat from your scooter.

2. Place the seat upside down so that you can see the bottom of the seat base. See figure 22.

3. Use a wrench to remove the two back bolts on the outermost part of the rear seat.

4. Insert the bolt through the appropriate ends of the positioning belt and then reinstall the bolts and belt

back into the seat bottom.

5. Tighten the bolts.

To adjust the positioning belt for operator comfort:

1. Insert the metal tab on the right side of the belt into the plastic housing on the opposite strap until you

hear a “click.” See figure 23A.

2. Pull the strap on the right side of the belt until it is secure, but not so tight as to cause discomfort.

To release the positioning belt:

1. Press the push button mechanism on the plastic housing.

MANDATORY! Make sure the positioning belt is properly secured to the scooter and is

adjusted for operator comfort before each use.

MANDATORY! Inspect the positioning belt for loose or damaged parts before each use of

the scooter. If you discover a problem, contact your authorized Pride Provider for

maintenance and repair.

VI. COMFORT ADJUSTMENTS

Figure 23A. Positioning Belt

Figure 23. Positioning Belt Bolts

BOLTS

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 43 44

No comments

Easy Travel Elite Owner's Manual Page 32